Edwards EST RLCD-C-2 LCD Remote Annunciator with Controls

The Edwards EST RLCD-C-2 is an R-Series LCD remote annunciator with common controls for compatible Edwards fire alarm control panels, including EDGE-ML systems. It provides remote system status through a backlit 4 x 20 character LCD display, front-panel status LEDs, an internal buzzer, and RS-485 communication with no programming required beyond addressing. Key Specifications: Type: LCD remote annunciator with common controls Core Function(s): Provides remote fire alarm system status, event text display, acknowledge/silence, reset, signal silence, drill, and lamp test functions Communication: RS-485 data riser; Class B/DCLB, redundant Class B/DCLB, or Class A/DCLA Power: 24 VDC continuous; 62 mA standby current; 91 mA alarm current Display: Backlit LCD with 4 lines of 20 characters each Indicators/UI: Power, Fire Alarm, Supervisory, Ground Fault, Trouble, Controls Enabled, Ack/Silence, Reset, Signal Silence, Drill, and Lamp Test Wiring: 18 to 14 AWG twisted pair data wiring; maximum wire run 4,000 ft Mounting: Standard North American 4-inch square electrical box or listed R-Series enclosure Operating Range: 32 to 120 F; 0 to 93 percent RH, noncondensing Compatible Expanders & Accessories: RLED24-2 - 24-pair LED zone expander with expander cable and zone card insert RA-ENC1 - One-position remote annunciator enclosure RA-ENC2 - Two-position enclosure for one annunciator and one remote expander RA-ENC3 - Three-position enclosure for one annunciator and two remote expanders RKEY - Remote key switch for enabling or disabling common controls System Compatibility: Compatible with Edwards R-Series supported fire alarm control panels, including EDGE-ML systems, using the RS-485 annunciator data riser. NOTE: Replaces the older RLCD-C. For systems with multiple older annunciators, replace all annunciators with the new version.