Gamewell FCI 71035 RoR / Fixed Heat Detector

Note: This product has been discontinued by manufacturer. The Gamewell FCI 71035 is a Series 60 conventional two-wire thermal heat detector for conventional fire alarm zones. It provides 135 F fixed-temperature and rate-of-rise heat detection, uses matched thermistors for fast temperature change response, and includes a latching red alarm LED for quick device identification. Key Specifications: Type: Conventional two-wire thermal heat detector Core Function(s): Detects rapid temperature rise or a fixed temperature threshold of 135 F Loop/Protocol: Conventional 2-wire initiating device circuit Power: 6 to 28 V alarm voltage; 52 mA normal alarm output at 24 V Indicators/UI: Integral red alarm LED that latches when the detector enters alarm Sensing: Matched thermistor design for rate-of-rise and fixed-temperature heat detection Operating Range: -5 F to 195 F; 0% to 95% relative humidity, non-condensing Remote Output: Supports remote alarm output, 20 mA maximum diode gated Compatible Bases & Accessories: 71036 - Standard 4.0 inch detector base 71086 - Standard 6.0 inch detector base 71086-LOW - 6.0 inch low-profile detector base 71086-RED - 6.0 inch detector base with flashing red power LED 71086-GREEN - 6.0 inch detector base with flashing green power LED 71086-SNDR - 6.0 inch detector base with 24 V internal sounder 71393 - Detector base with relay and flashing green power LED System Compatibility: Gamewell Series 60 conventional detector circuits and compatible conventional fire alarm control panels