Gamewell FCI XP95-P Photoelectric Smoke Detector

Note: This product has been discontinued by manufacturer. Replacement: Apollo SA5050-250APO The Gamewell FCI XP95-P is an analog addressable photoelectric smoke sensor for Gamewell-FCI 600 Series and ILI95-E3 Series fire alarm control panels. It uses an infrared smoke sensing chamber, digitally transmits its address and analog chamber values to the panel, and stores the device address in the base using an XPert addressing card. Key Specifications: Type: Analog addressable photoelectric smoke sensor Core Function(s): Detects smoke using infrared photoelectric light-scattering technology Loop/Protocol: Two-wire SLC for Gamewell-FCI 600 Series and ILI95-E3 Series systems Power: 17 to 28 VDC from the SLC; 340 uA standby current; 0.00434 A alarm LED current Indicators/UI: Two-color status LED; flashes red when polled and lights continuously in alarm Addressing: Address is stored in the base and set with an XPert addressing card Sensing: Infrared emitter pulses every second or by direct interrogation; smoke scatters light onto the photo diode receptor Operating Range: 32 F to 140 F; 0% to 95% relative humidity, non-condensing Remote Output: Supports optional remote LED output, 0.004 A at 5 VDC Compatible Bases & Accessories: XP95-B4 - 4-inch mounting base with XPert addressing card XP95-B6R4 - 6-inch 4-wire relay base with XPert addressing card XP95-B6SNDR - 6-inch mounting base with audible alarm sounder and XPert card GW71112 - Blank XPert addressing cards GW30203 - Remote LED indicator on single gang plate System Compatibility: Gamewell-FCI 600 Series and ILI95-E3 Series analog addressable fire alarm control panels Alternate Part Numbers: 55000-650