Kidde FX-10RD (10-Zone Conventional FACP) w/ Dialer

This part has been discontinued and replaced by FX-10R + F-DACT The Kidde FX-10RD is a conventional fire-alarm control panel with ten Class B initiating-device circuits (IDCs) that can be field-converted to five Class A IDCs. Four notification-appliance circuits (NACs) deliver up to 7 A of 24 V DC power and may be wired as four Class B or two Class A outputs. A factory-installed dual-line dialer/modem reports events in Contact ID or 4/2 format and adds a two-line LCD for local status and programming. Front-panel programming, one-person walk test, and selectable IDC and NAC types streamline installation and service. When paired with CleanMe-compatible smoke detectors, the panel provides drift compensation and remote maintenance alerts to reduce nuisance alarms. The FX-10RD operates from 120 VAC, supplies regulated 27.4 V DC, and charges up to 24 Ah of sealed lead-acid batteries (18 Ah fit inside the cabinet). Model Variants: FX-10R – No dialer FX-10RD – Dual-line dialer included Key Specifications: Type: Conventional FACP Zone Capacity: 10 Class B or 5 Class A IDCs NAC Circuits: 4 Class B or 2 Class A, 2.0 A per circuit, 7.0 A total Power Supply: 120 VAC 60 Hz input, 7.5 A total system output Auxiliary Power: 27.4 V DC regulated, 0.5 A (programmable resettable) Battery Support: Two 24 Ah max (18 Ah fit in cabinet) Communicator: Built-in dual-line dialer/modem (Contact ID or 4/2) (Included) Compatible Modules & Accessories: F-DACT – Replacement dialer/modem module (Included) F-XTR120 – Expander transformer (adds NAC power) CTM – City-tie module RPM – Reverse-polarity module FSRSI – Remote system indicator FSRZI-A – Five-zone remote LED indicator FSRZI-SA – Five-zone remote LED indicator (surface) FSRA10 – Ten-zone remote annunciator FSRA10C – Ten-zone remote annunciator with common LEDs FSRRM24 – Remote relay module (five Form C relays) FSUIM – Universal input / graphic driver module MFC-A – Multifunction accessory cabinet Compatible Detectors & Devices: Compatible with Kidde CleanMe-enabled conventional detectors (2M, 2400, 500, and 700 Series photoelectric and heat sensors) as well as standard water-flow, supervisory, and manual pull-station contacts. Other conventional units may also be compatible.