Kidde K-RLCD-CR Red LCD Remote Annunciator with Controls

NOTE: This part is discontinued by the manufacturer. Replace with: K-RLCD-CR-2. The Kidde K-RLCD-CR is a red R-Series LCD remote annunciator with common controls for compatible Kidde fire alarm control panels. It provides remote system status through a backlit 4 x 20 character LCD display, front-panel status LEDs, an internal buzzer, and RS-485 communication with no programming required beyond addressing. Key Specifications: Type: Red LCD remote annunciator with common controls Core Function(s): Provides remote fire alarm system status, event text display, acknowledge/silence, reset, signal silence, drill, and lamp test functions Communication: RS-485 data riser; Class A or Class B Power: 24 VDC continuous; 99 mA standby current; 115 mA alarm current Display: Backlit LCD with 4 lines of 20 characters each Indicators/UI: Power, Fire Alarm, Supervisory, Ground Fault, Trouble, Controls Enabled, Ack/Silence, Reset, Signal Silence, Drill, and Lamp Test Wiring: 18 to 14 AWG twisted pair data wiring; maximum wire run 4,000 ft Mounting: Standard North American 4-inch square electrical box or listed R-Series enclosure Operating Range: 32 to 120 F; 0 to 93 percent RH, noncondensing Compatible Expanders & Accessories: K-RLED24 - 24-pair LED zone expander with expander cable and zone card insert RA-ENC1 - One-position remote annunciator enclosure RA-ENC2 - Two-position enclosure for one annunciator and one remote expander RA-ENC3 - Three-position enclosure for one annunciator and two remote expanders LSRA-MIR-SB - Surface mount box for single R-Series annunciator RKEY - Remote key switch for enabling common controls System Compatibility: Compatible with Kidde R-Series supported fire alarm control panels using the RS-485 annunciator data riser.