Notifier FDRM-1 Dual Relay Monitor Module

The Notifier FDRM-1 is a multi output-input dual relay/monitor module for Notifier Onyx and CLIP series FACPs on a two-wire SLC. It combines two Form C relay outputs and two Class B monitor inputs, letting the panel control relay switching while monitoring normally open contact devices, with onboard LEDs for status and alarm indication. Key Specifications: Type: Intelligent addressable dual relay/monitor module (2 relay outputs, 2 monitor inputs) Core Function(s): Provides two Form C relay outputs for auxiliary control plus two Class B monitor inputs for normally open contact devices; powered directly from the SLC Loop/Protocol: Notifier SLC; rotary decimal addressing (1-159 FlashScan, 1-99 CLIP); uses up to four consecutive addresses (base address = Relay 1, +1 = Monitor 1, +2 = Relay 2, +3 = Monitor 2) Power: 15 to 32 VDC (SLC); 24 mA max (4 LEDs on); 1300 uA average operating current Relay Output: Two Form C relays for switching applications where the load circuit does not require supervision (contact ratings vary by load type) Indicators/UI: LEDs flash green during normal operation (programmable option) and latch steady red in alarm; each relay output has its own green LED; each monitored input has its own bi-color LED (panel controlled) Mounting: Mounts to a 4-inch square, 2-1/8 inch deep junction box Compatible Accessories: SMB500 - Optional surface-mount backbox DNR - Duct detector housing DNRW - Watertight duct detector housing EA-CB - Control module barrier System Compatibility: Works with Notifier Onyx and CLIP series fire alarm control panels that support FlashScan or CLIP operation on the SLC loop.