Notifier NC-100 Addressable NAC Control Module

The Notifier NC-100 is an intelligent addressable control module for Notifier FireWarden series panels that supervises a Class B (Style Y) or Class A (Style Z) notification appliance circuit for horns, strobes, and other 24 VDC loads. It is powered directly from the two-wire SLC loop, uses direct-decade addressing, and can be activated manually or through panel programming on a select basis. Key Specifications: Type: Intelligent addressable control module Core Function(s): Supervises and switches a 24 VDC notification appliance or control circuit while reporting open, normal, and short status to the panel Loop/Protocol: FireWarden SLC; direct-decade addressing 01-99 with FireWarden-100-2(C) and 01-50 with FireWarden-50(C) Power: 15 to 32 VDC from SLC; 6.5 mA max current draw with LED on; 350 uA average operating current with LED flashing Indicators/UI: Integral LED blinks when communicating and turns steady when activated; two rotary switches for address setting Circuit Style: One Class B (Style Y) or Class A (Style Z) NAC External Supply: Up to 80 V RMS or DC; 2 mA maximum drain on external supply using internal EOL relay EOL: 47K ohms Mounting: Mounts to a 4-inch square, 2.125-inch deep box Compatible Accessories: SMB500 - Optional surface-mount backbox CB500 - Optional control module barrier for separating power-limited and non-power-limited wiring in the same box System Compatibility: Works with Notifier FireWarden series intelligent control panels, including FireWarden-100-2 and FireWarden-50, on the SLC loop.