System Sensor B200S-IV Intelligent Sounder Base (Ivory)

The System Sensor B200S-IV is an intelligent addressable sensor sounder base in ivory that adds event-driven audible signaling at the detector location. It adopts the same address as the attached detector while using a unique device type on the loop, allowing the panel to command individual sounders or groups with selectable volume and tone patterns. Key Specifications: Type: Intelligent addressable sensor sounder base (ivory) Core Function(s): Provides addressable sounder output at the detector base location with panel-controlled grouping, volume, and tone selection Loop/Protocol: Adopts the detector address but operates as a unique device type on the loop for sounder control and grouping Power: SLC operating voltage 15 to 32 VDC; SLC standby current 300 uA max. External supply 16 to 33 VDC (VFWR); external standby current 500 uA max; alarm current 35 mA max (high volume) or 15 mA max (low volume) Audible Output: Two volume levels (75 or 85 dBA). Tones include ANSI Temporal 3, ANSI Temporal 4, and March Time (some FACPs also support custom tone patterns) Synchronization: Recognizes the System Sensor synchronization protocol when powered from a sync-capable supply or FACP output Mounting: Mounting plate fits common junction boxes including single-gang, double-gang, 3.5-inch octagon, 4-inch octagon, and 4-inch square Wiring: 14 AWG to 12 AWG System Compatibility: Used with compatible Select Series intelligent addressable plug-in detector heads on supported addressable SLC systems. Consult the FACP manufacturer for compatibility with the addressable sounder base model. NOTE: Ivory (-IV) bases are suitable for use with FlashScan/Velociti/LiteSpeed, and CLIP communications protocols.