Siemens PAD-5-6A Complete 6 Amp Addressable Power-Supply Kit

The Siemens PAD-5-6A kit adds 6 A of regulated 24 V DC power for horns, strobes, releasing solenoids, or auxiliary loads. The package combines a PAD-5 main board, single-height enclosure, and 170 W power supply to provide four power-limited NAC outputs, a supervised follower input, built-in strobe sync, ANSI Temporal 3 & 4 coding, dual trouble relays, LED status, and an onboard, temperature-compensated battery charger. The PAD-5-6A occupies one address on the P2 loop of a Siemens Modular FACP, letting you monitor and control all NACs from the main panel. Model Variants: PAD-5-6A – 6A kit with 170 W power supply PAD-5-6A-R – 6A kit, red enclosure PAD-5-9A – 9A kit with 300 W power supply PAD-5-9A-R – 9A kit, red enclosure Key Specifications: Type: Addressable NAC power expander and battery charger Total Output: 24 V DC at 6 A (four Class B or two Class A circuits) Auxiliary Output: 24 V DC, 3 A (counts toward 6 A total) Follower Input: One supervised NAC follower, 16 – 33 V DC or dry contact Sync & Coding: System Sensor, Wheelock, Gentex, AMSECO sync; ANSI Temporal 3 & 4; March-time 30/60/120 PPM Primary Power: 120 VAC, 50/60 Hz, 3 A maximum Battery Capacity: Two 7 Ah or 18 Ah internal; charges up to 18 Ah (100 Ah with external battery box) Trouble Relays: Form C general-trouble and Form A AC-fail contacts Compatible Modules & Accessories: PAD-5-MB – Replacement main board PAD-5-CLSA – Class A/B expansion card (adds four Class B or two Class A outputs) PAD-5-CDC – Four-zone conventional detector card PAB-ENCL / PAB-ENCL-R – 1 HU replacement enclosure (black or red) FP2011-U1 – 170 W power-supply module PAD4-BATT-BRKT – Seismic battery bracket BAAP / P3AP / P4AP – Adapter plates for booster or auxiliary power units