Silent Knight 5495 Distributed Power Module (6 Dip Switch)

The Silent Knight 5495 distributed power module (6 DIP switch version) is a 6A, 24VDC filtered notification power expander with built-in battery charging, supervised NAC expansion, and onboard appliance synchronization. This revision uses a 6-position DIP switch bank, where DIP #6 adds built-in sync selections for Faraday, Gentex, System Sensor, and Wheelock; it does not include DIP #7, so AMSECO sync is not available on this version. Key Specifications: Type: Distributed power module / NAC power expander (6-position DIP switch revision) Core Function(s): Provides filtered 24VDC notification power with battery backup/charging, supervised NAC outputs, AC loss and battery/ground fault monitoring, and a Form C trouble relay Power: 120 VAC input; 24 VDC output up to 6A total; 3A max per NAC output circuit; 3A max auxiliary output; supports batteries up to 35Ah charging capacity Indicators/UI: AC power LED (green); Battery, Ground Fault, Aux Trouble, and Output Trouble LEDs (yellow); 6-position DIP switches for input-to-output mapping, Class A/B selection, auxiliary behavior, AC-loss delay, ANSI temporal output options, and built-in sync selections (DIP #6: Faraday, Gentex, System Sensor, Wheelock; no DIP #7 for AMSECO) System Compatibility: Compatible with fire alarm control panels that provide reverse-polarity supervised NAC outputs (9–32 VDC signaling) for triggering, while the 5495 provides the downstream 24VDC notification power and supervision.