Silent Knight 5495 Distributed Power Module (7 Dip Switch)

The Silent Knight 5495 distributed power module (7 DIP switch version) is a 6A, 24VDC filtered notification power expander with built-in battery charging, supervised NAC expansion, and onboard appliance synchronization. This newest revision uses a 7-position DIP switch bank, where DIP #6 adds built-in sync selections for Faraday, Gentex, System Sensor, and Wheelock, and DIP #7 adds AMSECO synchronization for broader appliance matching. Key Specifications: Type: Distributed power module / NAC power expander (7-position DIP switch revision) Core Function(s): Provides up to 6A of filtered 24VDC for notification appliances, with battery backup/charging, supervision (AC, battery, ground fault, NAC/AUX faults), Form C trouble relay, and built-in ANSI temporal and synchronization options Power: 120 VAC input; 24 VDC output up to 6A total; 3A max per NAC output circuit; 3A max auxiliary output; supports batteries up to 35Ah charging capacity Indicators/UI: AC power LED (green); Battery, Ground Fault, Aux Trouble, and Output Trouble LEDs (yellow); 7-position DIP switches for input-to-output mapping, Class A/B selection, auxiliary behavior, AC-loss delay, ANSI temporal output options, and expanded built-in sync selections (DIP #6: Faraday, Gentex, System Sensor, Wheelock; DIP #7: AMSECO) Equivalent Product: Gamewell FCI GFPS-6RB – Equivalent 6A distributed power replacement board with the same 7 DIP switch sync selections Gamewell FCI SNAC-6 – Equivalent 6A distributed power replacement board with the same 7 DIP switch sync selections System Compatibility: Compatible with fire alarm control panels that provide reverse-polarity supervised NAC outputs (9–32 VDC signaling) for triggering, while the 5495 provides the downstream 24VDC notification power and supervision.