Silent Knight IDP-PHOTO-W Smoke Detector (White)

The Silent Knight IDP-PHOTO-W is an intelligent addressable plug-in photoelectric smoke detector for Silent Knight Farenhyt addressable SLC loops. It uses rotary decimal addressing for point ID location and an enhanced optical sensing chamber engineered to detect smoke from a wide range of combustion sources, with programmable sensitivity that is continuously monitored and reported to the panel. This model supports FlashScan protocol. Key Specifications: Type: Intelligent addressable photoelectric smoke detector Core Function(s): Addressable photoelectric smoke detection with programmable sensitivity and continuous sensitivity monitoring Loop/Protocol: Silent Knight SLC; FlashScan only Power: 15 to 32 VDC peak from SLC; 200 μA max average standby @ 24 VDC (LED enabled); 4.5 mA max current @ 24 VDC (“ON”) Indicators/UI: 360° viewing angle (two bi-color LEDs); LEDs blink green in Normal condition and turn steady red in Alarm; rotary decimal addressing; remote test feature from the panel; built-in functional test switch activated by external magnet; walk test with address display Operating Range: 32°F to 122°F (0°C to 50°C) Humidity Range: 10% to 93% RH, non-condensing Compatible Bases & Accessories: B300-6 – White, 6” base, standard flanged low-profile mounting base B501-WH – White, 4” standard European flangeless mounting base B200S-WH – White, intelligent, programmable sounder base B224BI-WH – White, isolator detector base B224RB-WH – White, relay detector base RA100Z – Remote LED annunciator, 3-32 VDC. For use with B501 and B300-6. TR300 – White, replacement flange for B210LP or B300-6 bases System Compatibility: Works with Silent Knight fire alarm control panels that support FlashScan protocol on the SLC loop.