Kidde FX-1000 (Intelligent FACP)

The Kidde FX-1000 is an intelligent addressable fire-alarm control panel. One Class A/B SLC loop supports 250 addressable points (125 detectors plus 125 modules), and three open expansion slots accept loop-controller cards to raise capacity to 1,000 points in 250-point increments. Four onboard NACs supply up to 6 A, configurable as four Class B or two Class A circuits. The panel operates from 120 VAC (2.0 A max) and provides 27.4 V DC power-limited outputs. Two 18 Ah batteries fit inside; charging capacity is 26 Ah. A dual-line dialer can be added with the optional SA-DACT card. Model Variants: FX-1000 – No dialer FX-1000D – Dual-line dialer included Key Specifications: Type: Intelligent addressable FACP Point Capacity: 250 (125 detectors + 125 modules), expandable to 1,000 SLC Loops: 1 included; up to 4 total with expansion cards NAC Circuits: 4 Class B or 2 Class A, 2.5 A per circuit, 6 A total Primary Power: 120 VAC 60 Hz, 2.0 A max Accessory Power: 27.4 V DC, 2.5 A power-limited Battery Support: Two 18 Ah internal (26 Ah charging capacity) Communicator: Optional SA-DACT dual-line dialer/modem (Contact ID) Compatible Modules & Accessories: FX-SLC1 – Single 250-point loop card FX-SLC2 – Dual 500-point loop card RZI16-2RS – 16-IDC / 2-NAC zone interface module SA-ETH – Ethernet interface SA-232 – RS-232 printer/computer interface SA-DACT – Dual-line dialer/modem option card SA-TRIM2 – Flush-mount trim kit CTM – City-tie module BC-1R – 24 Ah battery cabinet MFC-A – Multifunction auxiliary cabinet Compatible Detectors & Devices: KI-OSD – Optical smoke detector KI-OSHD – Optical smoke / fixed-temperature heat detector KI-OSCD – Optical smoke + CO detector KI-HRD – Rate-of-rise heat detector KI-HFD – Fixed-temperature (135 °F) heat detector KI-HCD – 135 °F heat + CO detector KIR-OSD – Optical smoke detector (rotary-addressed) KIR-HD – Fixed-temperature / rate-of-rise heat detector (rotary-addressed) KIR-HCD – Heat + CO detector (rotary-addressed) KI-SB – Standard base KI-IB – Isolator base KI-RB – Relay base KI-ABST – Sounder base FX-270 – Single-action addressable pull station FX-278 – Dual-action addressable pull station