Fire-Lite MS-9200UDLS (Intelligent FACP + DACT) Replacement Board, New Style

NOTE: This part is discontinued by the manufacturer. Replace with: ES-200X. The Fire-Lite MS-9200UDLS Replacement Board, New Style is an intelligent addressable FACP main control board with a built-in DACT for the MS-9200UDLS fire alarm control panel. It supports one SLC loop with LiteSpeed or CLIP operation, up to 198 addressable devices, four onboard NACs, onboard relays, and local or remote programming through PS-Tools. NOTE: This is the New Style board with programmable NAC/bell circuits instead of the older A/B selectable card. New Style and Old Style boards mount differently, so confirm the cabinet and chassis style before ordering. Key Specifications: Type: Intelligent addressable FACP replacement board with built-in DACT Device Capacity: 198 addressable devices; 99 detectors and 99 monitor, control, or relay modules Loop/Protocol: One SLC loop; LiteSpeed or CLIP operation Legacy Device Support: Compatible with legacy Fire-Lite 300 Series devices in CLIP mode only NAC Circuits: Four Class B Style Y NACs, convertible to four Class A Style Z NACs with ZNAC-92 Power: 120 VAC, 60 Hz, 3.0 A primary input System Output: 3.0 A total 24 VDC output, expandable to 6.0 A with XRM-24B Battery Support: 7 to 18 Ah charging capacity in the FACP cabinet; larger batteries require external charger and battery cabinet Indicators/UI: Integral 80-character backlit LCD display with keypad controls and status LEDs Ports: USB upload/download, EIA-232 printer/PC interface, and ANN-BUS support Relays: Two programmable Form-C relays and one fixed Form-C trouble relay Dialer/Communicator: Built-in DACT for central station reporting and remote programming Compatible Modules & Accessories: ANN-80 - Remote LCD annunciator ANN-S/PG - Serial/parallel printer gateway ANN-RLY - Relay module 4XTMF - Reverse polarity transmitter module ZNAC-92 - Class A NAC converter module XRM-24B - Optional transformer for expanded 6.0 A output BB-26 - Battery backbox Compatible Detectors & Devices: SD365 / SD365-IV - Photoelectric smoke detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory SD365T / SD365T-IV - Photoelectric smoke + thermal detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory SD365R / SD365R-IV - Remote test capable photoelectric smoke detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory H365 / H365-IV - Fixed-temperature heat detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory CMF-300 / CMF-300-6 - Addressable control modules CRF-300 / CRF-300-6 - Addressable relay modules Also compatible with legacy Fire-Lite 300 Series devices in CLIP mode only. White 365 Series detectors listed above are LiteSpeed-only; ivory 365 Series detectors support LiteSpeed or CLIP.