Fire-Lite MS-9200UDLS (Intelligent FACP + DACT) Replacement Board, Old Style

NOTE: This part is discontinued by the manufacturer. Replace with: ES-200X. The Fire-Lite MS-9200UDLS Replacement Board, Old Style is an intelligent addressable FACP main control board with a built-in DACT for the MS-9200UDLS fire alarm control panel. It supports one SLC loop with LiteSpeed or CLIP operation, up to 198 addressable devices, onboard NACs, onboard relays, and local or remote programming through PK-CD. NOTE: This is the Old Style board with soldered terminal blocks and the older A/B selectable NAC card design. New Style boards use removable terminal blocks and programmable NAC/bell circuits, and the two board styles do not share the same cabinet mounting points. Key Specifications: Type: Intelligent addressable FACP replacement board with built-in DACT Device Capacity: 198 addressable devices; 99 detectors and 99 monitor, control, or relay modules Loop/Protocol: One SLC loop; LiteSpeed or CLIP operation Legacy Device Support: Compatible with legacy Fire-Lite 300 Series devices in CLIP mode only NAC Circuits: Four Class B Style Y NACs or two Class A Style Z NACs using the Old Style A/B selectable NAC card design Power: 120 VAC, 60 Hz, 3.0 A primary input System Output: 3.6 A total 24 VDC output, expandable to 6.0 A with XRM-24B Battery Support: 7 to 18 Ah charging capacity; cabinet supports up to two 18 Ah batteries Indicators/UI: Integral 80-character backlit LCD display with keypad controls and status LEDs Ports: EIA-232 printer/PC interface and EIA-485 annunciator communication Relays: Two programmable Form-C relays and one fixed Form-C trouble relay Dialer/Communicator: Built-in DACT for central station reporting and remote programming Compatible Modules & Accessories: 4XTMF - Reverse polarity transmitter module XRM-24B - Optional transformer for expanded 6.0 A output BB-26 - Battery backbox LCD-80F - Remote LCD annunciator Compatible Detectors & Devices: SD365 / SD365-IV - Photoelectric smoke detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory SD365T / SD365T-IV - Photoelectric smoke + thermal detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory SD365R / SD365R-IV - Remote test capable photoelectric smoke detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory H365 / H365-IV - Fixed-temperature heat detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory CMF-300 / CMF-300-6 - Addressable control modules CRF-300 / CRF-300-6 - Addressable relay modules Also compatible with legacy Fire-Lite 300 Series devices in CLIP mode only. White 365 Series detectors listed above are LiteSpeed-only; ivory 365 Series detectors support LiteSpeed or CLIP.