Fire-Lite MS-9200UDLS with Chassis and Transformer, New Style

NOTE: This part is discontinued by the manufacturer. Replace with: ES-200X. The Fire-Lite MS-9200UDLS with Chassis and Transformer, New Style is an intelligent addressable fire alarm control assembly with the main control board, chassis, and primary transformer for the MS-9200UDLS system. It includes a built-in DACT, supports one SLC loop with LiteSpeed or CLIP operation, provides up to 198 addressable devices, and includes four onboard NACs, onboard relays, and local or remote programming through PS-Tools. NOTE: This is the New Style board and chassis assembly with programmable NAC/bell circuits instead of the older A/B selectable card. New Style and Old Style boards use different chassis and cabinet mounting points, so confirm the cabinet and chassis style before ordering. Key Specifications: Type: Intelligent addressable FACP board and chassis assembly with built-in DACT Included Components: New Style replacement board, chassis, and primary transformer Device Capacity: 198 addressable devices; 99 detectors and 99 monitor, control, or relay modules Loop/Protocol: One SLC loop; LiteSpeed or CLIP operation Legacy Device Support: Compatible with legacy Fire-Lite 300 Series devices in CLIP mode only NAC Circuits: Four Class B Style Y NACs, convertible to four Class A Style Z NACs with ZNAC-92 Power: 120 VAC, 60 Hz, 3.0 A primary input System Output: 3.0 A total 24 VDC output; requires an additional XRM-24B to expand output to 6.0 A Battery Support: 7 to 18 Ah charging capacity in the FACP cabinet; larger batteries require external charger and battery cabinet Indicators/UI: Integral 80-character backlit LCD display with keypad controls and status LEDs Ports: USB upload/download, EIA-232 printer/PC interface, and ANN-BUS support Relays: Two programmable Form-C relays and one fixed Form-C trouble relay Dialer/Communicator: Built-in DACT for central station reporting and remote programming Compatible Modules & Accessories: ANN-80 - Remote LCD annunciator ANN-S/PG - Serial/parallel printer gateway ANN-RLY - Relay module 4XTMF - Reverse polarity transmitter module ZNAC-92 - Class A NAC converter module XRM-24B - Optional transformer for expanded 6.0 A output BB-26 - Battery backbox Compatible Detectors & Devices: SD365 / SD365-IV - Photoelectric smoke detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory SD365T / SD365T-IV - Photoelectric smoke + thermal detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory SD365R / SD365R-IV - Remote test capable photoelectric smoke detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory H365 / H365-IV - Fixed-temperature heat detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory CMF-300 / CMF-300-6 - Addressable control modules CRF-300 / CRF-300-6 - Addressable relay modules Also compatible with legacy Fire-Lite 300 Series devices in CLIP mode only. White 365 Series detectors listed above are LiteSpeed-only; ivory 365 Series detectors support LiteSpeed or CLIP.