Fire-Lite MS-9200UDLS with Chassis and Transformer, Old Style

NOTE: This part is discontinued by the manufacturer. Replace with: ES-200X. The Fire-Lite MS-9200UDLS with Chassis and Transformer, Old Style is an intelligent addressable fire alarm control assembly with the main control board, chassis, and primary transformer for the MS-9200UDLS system. It supports one SLC loop with LiteSpeed or CLIP operation, up to 198 addressable devices, onboard NACs, onboard relays, and local or remote programming through PK-CD. NOTE: This is the Old Style board and chassis assembly with soldered terminal blocks and the older A/B selectable NAC card design. New Style boards use removable terminal blocks and programmable NAC/bell circuits, and the two styles do not share the same cabinet mounting points. Key Specifications: Type: Intelligent addressable FACP board and chassis assembly with built-in DACT Included Components: Old Style replacement board, chassis, and primary transformer Device Capacity: 198 addressable devices; 99 detectors and 99 monitor, control, or relay modules Loop/Protocol: One SLC loop; LiteSpeed or CLIP operation Legacy Device Support: Compatible with legacy Fire-Lite 300 Series devices in CLIP mode only NAC Circuits: Four Class B Style Y NACs or two Class A Style Z NACs using the Old Style A/B selectable NAC card design Power: 120 VAC, 60 Hz, 3.0 A primary input System Output: 3.6 A total 24 VDC output; requires an additional XRM-24B to expand output to 6.0 A Battery Support: 7 to 18 Ah charging capacity; cabinet supports up to two 18 Ah batteries Indicators/UI: Integral 80-character backlit LCD display with keypad controls and status LEDs Ports: EIA-232 printer/PC interface and EIA-485 annunciator communication Relays: Two programmable Form-C relays and one fixed Form-C trouble relay Dialer/Communicator: Built-in DACT for central station reporting and remote programming Compatible Modules & Accessories: 4XTMF - Reverse polarity transmitter module XRM-24B - Optional transformer for expanded 6.0 A output BB-26 - Battery backbox LCD-80F - Remote LCD annunciator Compatible Detectors & Devices: SD365 / SD365-IV - Photoelectric smoke detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory SD365T / SD365T-IV - Photoelectric smoke + thermal detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory SD365R / SD365R-IV - Remote test capable photoelectric smoke detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory H365 / H365-IV - Fixed-temperature heat detectors; LiteSpeed for white, LiteSpeed or CLIP for ivory CMF-300 / CMF-300-6 - Addressable control modules CRF-300 / CRF-300-6 - Addressable relay modules Also compatible with legacy Fire-Lite 300 Series devices in CLIP mode only. White 365 Series detectors listed above are LiteSpeed-only; ivory 365 Series detectors support LiteSpeed or CLIP.