Fire-Lite SD365R-IV Smoke Detector w/ Remote Test (Ivory)

The Fire-Lite SD365R-IV is an intelligent addressable plug-in photoelectric smoke detector with remote test capability for Fire-Lite addressable fire alarm control panels, built as an ivory “-IV” service model that supports both LiteSpeed and CLIP protocol. It uses an enhanced optical sensing chamber for broad smoke detection, rotary decimal addressing for point ID location, and is intended for use with System Sensor DNR and DNRW duct detector housings. Key Specifications: Type: Intelligent addressable photoelectric smoke detector (remote test capable) Core Function(s): Photoelectric smoke sensing with remote test capability for duct housing applications Loop/Protocol: Fire-Lite SLC; LiteSpeed and CLIP Power: 15 to 32 VDC peak from SLC; 200 μA max average standby @ 24 VDC (LED enabled); 4.5 mA max current @ 24 VDC (“ON”) Indicators/UI: Two LEDs; LED blinks when polled and latches in alarm; rotary decimal addressing; remote test feature from the panel; built-in functional test switch activated by external magnet Operating Range: When installed in a DNR/DNRW duct housing: -4°F to 158°F (-20°C to 70°C) Humidity Range: 10% to 93% RH, non-condensing Compatible Bases & Accessories: B300-6-IV – Ivory 6-inch standard flanged low profile mounting base B501-IV – Ivory 4-inch flangeless mounting base B200S-IV – Ivory intelligent addressable sounder base (LiteSpeed) B224BI-IV – Ivory isolator detector base B224RB-IV – Ivory relay detector base RA100Z – Remote LED annunciator, 3-32 VDC. For use with B501 and B300-6. TR300-IV – Ivory trim ring System Compatibility: Works with Fire-Lite intelligent addressable fire alarm control panels that support LiteSpeed and CLIP protocol on the SLC loop.