Silent Knight IDP-PHOTO-R-IV Smoke Detector w/ Remote Test (Ivory)

The Silent Knight IDP-PHOTO-R-IV is an intelligent addressable plug-in photoelectric smoke detector with remote test capability for use with System Sensor DNR and DNRW duct detector housings. It uses rotary decimal addressing for point ID location and an enhanced optical sensing chamber engineered to sense smoke produced by a wide range of combustion sources. This detector uses FlashScan or CLIP protocol. Key Specifications: Type: Intelligent addressable photoelectric smoke detector (remote test capable) Core Function(s): Addressable photoelectric smoke detection with remote test capability Loop/Protocol: Silent Knight SLC; FlashScan and CLIP. Power: 15 to 32 VDC peak from SLC; 200 μA max average standby @ 24 VDC (LED enabled); 4.5 mA max current @ 24 VDC (“ON”) Indicators/UI: 360° viewing angle (two bi-color LEDs); LEDs blink green in Normal condition and turn steady red in Alarm; rotary decimal addressing; remote test feature from the panel; built-in functional test switch activated by external magnet; walk test with address display Operating Range: When installed in a DNR/DNRW duct housing: -4°F to 158°F (-20°C to 70°C) Humidity Range: 10% to 93% RH, non-condensing Compatible Bases & Accessories: B300-6-IV – Ivory 6-inch standard flanged low profile mounting base B501-IV – Ivory 4-inch flangeless mounting base B200S-IV – Ivory intelligent addressable sounder base B224BI-IV – Ivory isolator detector base B224RB-IV – Ivory relay detector base RA100Z – Remote LED annunciator, 3-32 VDC TR300-IV – Ivory Trim Ring System Compatibility: Works with Silent Knight fire alarm control panels that support FlashScan and CLIP protocol on the SLC loop.