Silent Knight IFP-300B (Intelligent Addressable FACP, Black Cabinet)

The IFP-300B is an intelligent addressable fire alarm control panel in a black, surface-mount cabinet with a built-in IP/POTS communicator. One built-in SLC supports up to 159 IDP/SK detectors and 159 IDP/SK modules per loop, or 127 SD devices per loop. System capacity expands to 300 addressable points with IDP/SK devices or 254 points with SD devices. Four Flexput circuits can be configured as NAC outputs or auxiliary power. Software features include JumpStart auto programming, drift compensation with maintenance alerts, a 4×40 LCD, and networking support for up to 32 panels via SK-NIC with copper or fiber options. Model Variants: IFP-300 – Red Cabinet IFP-300B – Black Cabinet IFP-300BD – Replacement electronics assembly (main board) Key Specifications: Type: Intelligent addressable FACP with built-in IP/POTS communicator Device Capacity: Up to 300 (IDP/SK) or 254 (SD) addressable points per panel SLC Loops: 1 built-in loop, expandable via SLC expander modules for IDP/SK or SD device families NAC / Flexput Circuits: Four configurable circuits, 3.0 A per circuit, 6.0 A maximum total, power limited and supervised Communication: IP and POTS reporting standard; optional cellular communicator Networking: Up to 32 panels networked with SK-NIC using copper or fiber interfaces Programming: Onboard keypad or PC via USB using HFSS; JumpStart auto programming Primary Power: 120 VAC 60 Hz, 3.3 A input Battery Support: Cabinet holds two 18 Ah batteries; charger supports 17 to 55 Ah Annunciation & Reporting: Supports RA-2000 LCD annunciators and 5824 serial or parallel printer interface Compatible Modules & Accessories: 6815 – SLC expander for IDP/SK addressable devices 5815XL – SLC expander for SD addressable devices 5496 – 6 A NAC power expander with four outputs RPS-1000 – 6 A intelligent auxiliary power supply SK-NIC – Network interface card; copper or fiber with SK-FML/SK-FSL 5880 – LED I/O module 5883 – Ten-relay interface module 5865-3 / 5865-4 – LED annunciators 5824 – Serial or parallel printer interface module RBB – Remote battery box accessory cabinet Remote Annunciators (SBUS): RA-2000 – 4×40 LCD annunciator, red RA-2000GRAY – 4×40 LCD annunciator, gray Compatible Detectors & Devices (IDP / System Sensor): IDP-PHOTO-W, IDP-PHOTO-IV – Photoelectric smoke detector IDP-HEAT-W, IDP-HEAT-IV – Fixed-temperature heat detector IDP-PULL-DA – Dual action pull station IDP-MONITOR, IDP-MINIMON – Monitor modules IDP-CONTROL – Supervised control module IDP-RELAY – Addressable relay module IDP-ISO – Line isolator module Also supports System Sensor SK-series equivalents, or SD-series devices (Hochiki protocol). Protocols cannot be mixed on the same system.