Kidde VS1-GD (64-Point Intelligent FACP w/ Dialer, Gray Door)
$1,200.00
This part has been discontinued and replaced by VS1-G + SA-DACT
The Kidde VS1-GD is an intelligent addressable fire-alarm control panel in a surface-mount cabinet with a gray door. It includes a factory-installed dual-line dialer for central-station reporting. One Class B Signature loop supports up to 64 addressable devices, and two Class B NACs supply 2.5 A each (3.75 A total) for horns, strobes, or auxiliary loads. The panel features a 3.75 A power supply, dual Form C alarm and trouble relays, a four-line LCD for configuration and diagnostics, built-in strobe synchronization, ANSI Temporal 3 and Temporal 4 coding, and two programmable front-panel switches.
Model Variants:
VS1-G – Gray door, no dialer
VS1-GD – Gray door, dual-line dialer
VS1-R – Red door, no dialer
VS1-RD – Red door, dual-line dialer
VS1-RE – Replacement electronics assembly (main board)
Key Specifications:
Type: Intelligent addressable FACP
Device Capacity: 64 addresses (any mix of detectors and modules)
SLC Loops: 1 Class B (convertible to Class A with SA-CLA adapter)
NAC Circuits: 2 Class B or 2 Class A (with SA-CLA), 2.5 A per circuit, 3.75 A total
Auxiliary Power: Two 24 V DC outputs, 500 mA each (one resettable)
Primary Power: 120 VAC 60 Hz, 1.3 A maximum input
Battery Support: Up to two 10 Ah batteries in cabinet; 26 Ah charging capacity
Communicator: Built-in dual-line dialer (Contact ID)
Annunciators: Supports up to eight K-R series LCD or LED annunciators
Compatible Modules & Accessories:
V-SLC2-1 – 64-point replacement loop controller (service board for VS1 panels)
SA-DACT – Replacement dual-line dialer / modem module
SA-232 – RS-232 interface card
SA-ETH – 10/100 Base-T Ethernet card
SA-CLA – Class A adapter module
K-RLCD – LCD remote annunciator (gray, no common controls)
K-RLCD-CR – LCD remote annunciator (red, with common controls)
CTM – City-tie module
BC-1R – 24 Ah battery cabinet (red)
MFC-A – Multifunction accessory cabinet
Compatible Detectors & Devices:
KI-OSD – Optical smoke detector
KI-OSHD – Optical smoke + heat detector
KI-HFD – Fixed-temperature heat detector
KI-HRD – Fixed-temperature / rate-of-rise heat detector
KI-HCD – Heat + CO detector
KI-SB – Standard detector base
KI-IB – Isolator detector base
KI-RB – Relay detector base
KI-ABST – Sounder detector base
GSA-CC1 – Control module
GSA-CR – Relay control module
GSA-MM1 – Monitor module
Compatible for use with: