Silent Knight IFP-2100 (Intelligent Addressable FACP w/ Communicator)

The IFP-2100 is an intelligent addressable fire-alarm control panel with one built-in SLC and a dual-technology communicator. The integrated DACT supports IP and POTS reporting, and optional cellular can be added. The panel ships with eight Flexput circuits that can be configured as NAC outputs or auxiliary power, plus one Form C trouble relay and two programmable Form C relays. Software features include JumpStart auto programming, drift compensation with maintenance alerts, 999 software zones and 999 output groups, and networking support for up to 32 panels. Key Specifications: Type: Intelligent addressable FACP with built-in IP/POTS communicator Device Capacity: 1 built-in SLC supporting up to 159 detectors and 159 modules (IDP/SK) or 127 devices (SD); expandable to 2100 (IDP/SK) or 2032 (SD) points SLC Loops: Expandable with SLC expander modules for IDP/SK or SD device families NAC / Power Circuits: Eight Flexput circuits, up to 3 A per circuit, 9 A system total Communication: IP and POTS reporting standard; optional cellular communicator Networking: Up to 32 panels networked with copper or fiber interface Programming: Built-in keypad or PC via USB using HFSS; JumpStart auto programming Primary Power: 120 VAC 60 Hz, 5 A (or 240 VAC 50/60 Hz, 2.8 A) Battery Support: Cabinet holds up to two 18 Ah batteries; charger capacity 17 to 55 Ah Annunciators: Supports up to 63 SBUS devices including LCD and LED annunciators Compatible Modules & Accessories: 6815 – SLC expander for IDP/SK addressable devices 5815XL – SLC expander for SD addressable devices 5496 – 6 A NAC power expander with four outputs SK-NIC – Network interface card; copper or fiber with SK-FML/SK-FSL 5880 – LED I/O module with 40 LEDs and 8 supervised inputs 5883 – Ten-relay interface module Remote Annunciators (SBUS): RA-2000 – 4×40 LCD annunciator, red RA-2000GRAY – 4×40 LCD annunciator, gray RA-1000 – 4×20 LCD annunciator, gray RA-1000R – 4×20 LCD annunciator, red RA-100 – 4×20 LCD annunciator, red Compatible Detectors & Devices: IDP-PHOTO-W (White) | IDP-PHOTO-IV (Ivory) - Photoelectric smoke IDP-HEAT-W (White) | IDP-HEAT-IV (Ivory) - Fixed-temperature heat IDP-PULL-SA – Single-action pull IDP-MONITOR – Monitor module IDP-MINIMON – Mini monitor module IDP-ISO – Fault isolator module Also supports System Sensor SK-series equivalents, or SD-series devices (Hochiki protocol). Protocols cannot be mixed on the same system.